Eaton Powerware 9125 - 1 Installation; Parts List

EATON Powerware
®
9125 (9910-E30) UPS Installation Guide for IBM
®
Applications S 164201696 Rev 1
1
Chapter 1 Installation
IBM part numbers are subject to change without notice.
Parts List
Table 1. E30 Base Configuration (42R8069)
Quantity IBM MN IBM FC IBM PN Eaton
®
PN Description
1 E30 — 42R8069
103002728-3992 E30 UPS 3000 VA, 2100W (in shipping carton or
factory-installed in rack)*
05145993-3 UPS Front Cover*
164201570 Read Me First Card
103004084-3991 (2) Rack Mounting Bracket Kits*:
S (2) Mounting Brackets (157606331-003)
S (4) Mounting Bracket Screws (M4 ×8) (180500136-202)
S (2) Mounting Handles (130500110-001)
S (4) Mounting Handle Screws (#8-32×1/2” ) (180500200-002)
103006173 Left Rail Assembly*
103006172 Right Rail Assembly*
1 — — 42R8070 103004081-3992 E30 Accessory Kit
* If the UPS is factory-installed in an IBM rack, these items are pre-assembled.
Table 2. E30 Application Matrix
IBM
MN
IBM
FC
IBM
PN
Eaton PN Description
i5/
iSeriest
Tower
IEC
i5/
iSeries
Tower
NEMA
p5/
pSeries
®
Tower
IEC
p5/
pSeries
Tower
NEMA
p5/
pSeries
Rack
WW
i5/
iSeries
Rack
WW
— 6570 42R4320 103003920-3991 NEMA
PowerPass
®
Distribution
Module (PDM)
— 1 — 1 — —
— 2939* 42R4332 103004741-5591 Relay-Serial
Card and Cable
Kit (DB-9,
1.8m/6 ft; DB-25,
9.1m/30 ft)
1 1 — — — 1
* Maximum: One FC 2934 or 2939 per E30 UPS.
NOTE IEC: IEC Countries (e.g., UK, Italy, etc.); NEMA: NEMA Countries (e.g. U.S. and Canada); WW: Worldwide