Ebtron Advantage IV Series User Manual

Advantage IV and EB-Flow2 Product Lines
O&M MANUAL
Section 3 – Custom Configuration
3-O&M_Settings_r1r Section 3Page 1
EBTRON, Inc • 1663 Hwy 701 S., Loris, SC 29569 • Toll Free: 800-2EBTRON (232-8766) • Fax: 843-756-1828 • EBTRON.com
3. SECTION OVERVIEW
This section discusses access to the settings menu and menu navigation for custom configuration. It includes
a table of the factory default settings, optional settings and ranges. A detailed reference and explanation for
each setting is also provided.
The settings menu allows customization of the transmitter’s factory default parameters.
After initial power-up, the transmitter is fully functional as an airflow and temperature measurement device.
Transmitters are “plug and play” and do not require additional setup unless modifications to the factory default
settings are desired by the user.
 The most common setup parameters modified pertain to analog output, network and alarm settings.
 Default and optional settings are shown in this document I-P first, followed by SI in brackets []. The
parameter value “as displayed” on the LCD is shown in all capitals followed by a brief descriptive
label or units in parenthesis ().
 Record any changes to the factory default settings for future reference. All Advantage IV Gold Series
transmitters are provided with a Bluetooth® Low Energy interface that allows transmitter settings to be
quickly downloaded then e-mailed and/or saved using your iOS or Android phone or tablet.
3.1. SETTINGS MENU ACCESS AND NAVIGATION
The SETTINGS menu contains the following submenu categories:
• GLOBAL
• GENERAL
• DISPLAY
• ANALOG OUTPUT
• RS-485
• ETHERNET
• RF-LINK
• USB
• EB-LINK
• ALARM
• FAN ALARM (GTx108-F/An only)
• RELAY (EF-x2000 transmitters only)
• ADJUSTMENTS
The following symbols are used to describe shortcut paths for menu and submenu navigation:
• > press the enter ENT pushbutton once
• < press the escape ESC pushbutton once
• ↓ press the down arrow pushbutton until the subsequent menu item or parameter appears
• ↑ press the up arrow pushbutton until the subsequent menu item or parameter appears
Simultaneously press the ↑ and ↓ pushbuttons during normal operation to enter the main menu. The
transmitter continues to operate normally in the background.

Ebtron Advantage IV Series Specifications

General

Brand	Ebtron
Model	Advantage IV Series
Category	Measuring Instruments
Language	English