Ebtron Advantage IV Series User Manual

TABLE 3-1 Factory Defaults, Optional Settings and Ranges
Parameter
Product
Line
Probe
Type
Special Criteria Default Optional Settings/Ranges Units
-P, -T, -U, -F
DPCONVERT=NO
DPCONVERT=YES N/A N/A
-P, -T, -U, -F
DPCONVERT=NO
DPCONVERT=YES N/A N/A
DPCONVERT=NO N/A N/A
DPCONVERT=YES OFF ON
FAW SMPLS All All 100 1 to 999 x 300 ms
-P, -T, -U, -F
DPCONVERT=NO
DPCONVERT=YES
GAIN1 Dual Location 1 of 2
GAIN2 Dual Location 2 of 2
F_ADJ UM=FPM [m/s] -99999 to 99999 [-99.99 to 99.99]
F_ADJ UM=CFM [L/s] -99999 to 99999
DPCONVERT=NO
F_ADJ UM=FPM [m/s]
-99999 to 99999 [-99.99 to 99.99]
DPCONVERT=NO
F_ADJ UM=CFM [L/s]
-99999 to 99999
DPCONVERT=YES 0.000 -5.000 to 5.000 [-1250 to 1250] iWG[Pa]
Dual Location 1 of 2
F_ADJ UM=FPM [m/s]
-99999 to 99999 [-99.99 to 99.99]
Dual Location 1 of 2
F_ADJ UM=CFM [L/s]
-99999 to 99999
Dual Location 2 of 2
F_ADJ UM=FPM [m/s]
-99999 to 99999 [-99.99 to 99.99]
Dual Location 2 of 2
F_ADJ UM=CFM [L/s]
-99999 to 99999
1.000 0.100 to 9.999
OFF ON
CFM [L/s]
13
-P, -T, -U, -F
GAIN
All
FLOW ADJ All
-B
F_ADJ UM All
ADJUSTMENTS
OFF2
-P, -T, -U, -F
-B
OFF1
-P, -T, -U, -F
FPM [m/s]
-B
Note 13: The default and only option for F_ADJ UM is FPM [m/s] when the AREA parameter is set to 0 or {null} .
PRESS ADJ All -B
0 F_ADJ UM
0 F_ADJ UM
-B
OFF
All
SettingsMenu_r1p Table 3-1 - Page 6

Ebtron Advantage IV Series Specifications

General

Brand	Ebtron
Model	Advantage IV Series
Category	Measuring Instruments
Language	English