4-O&M_Tools_r1g Section 4Page 7
EBTRON, Inc • 1663 Hwy 701 S., Loris, SC 29569 • Toll Free: 800-2EBTRON (232-8766) • Fax: 843-756-1828 • EBTRON.com
Use ↑↓ buttons to modify, {ENT} to accept and move to next prompt, {ESC} to move to previous prompt.
The LOCK menu item is only visible when the device is UNLOCKED.
Navigate entire menu to step 4 to lock device settings and tools. Press {ESC} twice at any time to exit without locking the device.
PROMPT RESPONSE DESCRIPTION
Lock transmitter parameters and tools.
Do not lock device. Return to normal operation.
Lock device using PCB serial number as lock/unlock code and return to normal operation.
User defined lock/unlock code with EBTRON "back door" emergency code override.
User defined lock/unlock code. Cannot be unlocked without code or return to factory.
Reenter lock code. Lock device and return to normal operation.
Note: If an invalid code is entered, the display will indicate "INVALID CODE" for 5 seconds and
return to step 3.
4.8. UNLOCK TOOL [UNLOCK]
The unlock tool unlocks transmitter settings and tools. Settings can be viewed and modified.
UNLOCK Tool (located in the TOOLS menu)
Use ↑↓ buttons to modify, {ENT} to accept and move to next prompt, {ESC} to move to previous prompt.
The UNLOCK menu item is only visible when the device is LOCKED.
Navigate entire menu to step 2 to unlock settings and tools. Press {ESC} twice at any time to exit without unlocking the device.
PROMPT RESPONSE DESCRIPTION
Lock transmitter parameters and tools.
Do not lock device. Return to normal operation.
Unlock the device and return to normal operation.
Note: If an invalid code is entered, the display will indicate "INVALID CODE" for 5 seconds and
return to step 2.
To Next Page
Loading...
Need help?
General
