Chengdu Ebyte Electronic Technology Co.,Ltd E180-Z6907A User Manual
Copyright ©2012–2019，Chengdu Ebyte Electronic Technology Co., Ltd.
4-22
6.6.13 Serial port baud rate
Baud rate parameters baud comparison table:
change the baud rate
configuration of serial
communication, you need to restart the device, and the changed baud rate will take effect.
6.6.14 Sleep time
sleep_time：（1～60）Sleep wake-up cycle indicates 1 ～ 60 Unit (s)
（61～255）Sleep wake-up cycle indicates 60+(sleep_time-60）*10 Unit (s)
Default 60s（60）
6.6.15 Storage time of parent node
Time: The parent node saves the data of its child nodes for 30 seconds. If any end-device node needs to accept the
parent node data of the parent node, the configuration of the sleep time cannot be longer than 30 seconds.
6.6.16 Period of network reconnection after loss of parent node
Rejoin period: （1～255）Reconnection period range 1～255 Unit: minute Default 5 minutes
6.6.17 The maximum number of attempts to reconnect
Rejoin maxcount: （1～255）Maximum range of reconnections 1～255 times
To Next Page
Loading...
Need help?
General
