EasyManuals Logo

Ebyte E180-Z6907A User Manual

Ebyte E180-Z6907A
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #36 background imageLoading...
Page #36 background image
Chengdu Ebyte Electronic Technology Co.,Ltd E180-Z6907A User Manual
Copyright ©2012–2019Chengdu Ebyte Electronic Technology Co., Ltd.
7-35
7.3.1.2 Unicast in long address form between end-device and coordinator
(1) Before communication, enter the configuration mode first, configure the target MAC address. The coordinator
end configures the target MAC address as the long MAC address of the end-device, and the end-device end configures
the target MAC address as the long MAC address of the coordinator.
(2) After the target MAC address is configured, the transmission mode needs to be configured. Change the "network
address (short address)" to "MAC address", and then write the parameters again. At this time, the target address is
configured to unicast in the form of MAC address.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ebyte E180-Z6907A and is the answer not in the manual?

Ebyte E180-Z6907A Specifications

General IconGeneral
BrandEbyte
ModelE180-Z6907A
CategoryWireless modules
LanguageEnglish

Related product manuals