Echo CS-2511TES User Manual

STARTER SYSTEM
CS-2511TES
251Ts, 251TCs
8
2-1 Disassemblingstarterassembly
1. Remove three bolts and remove starter assem-
bly (A) from unit.
2. Remove fan cover (B) from starter assembly (A).
3. Pull out starter rope about 30cm (12in) and hold
rope reel (C) by hand. Loop excess rope in rope
reel notch (c) as shown.
4. Rotate rope reel (C) counterclockwise to release
tension of rewind spring.
5. Remove screw (D).
6. Remove pawl catcher (E) and power spring (F).
7. Remove rope reel (C) from starter case (G)
slowly to prevent rewind spring (H) from unwind-
ing.
8. Remove rewind spring case assembly (J) from
starter case (G).
WARNING DANGER
Weareyeprotectionandtakecarewhen
removingropereel.Rewindspringmayun-
windsuddenlyandcausepersonalinjury.
A
C
D
E
H
J
G
c
F
C
B
A

Echo CS-2511TES Specifications

General

Engine Displacement	25.0 cc
Engine Type	2-stroke
Chain Pitch	3/8"
Weight	2.3 kg
Fuel Capacity	0.19 L
Oil Capacity	0.14 L
Chain Oil	Automatic
Chain Brake	Inertia
Bar Length	10 inches
Chain Gauge	0.050 inch