Echo CS-2511TES - Replacing Purge Bulb

FUEL SYSTEM
CS-2511TES
251Ts, 251TCs
32
4-6 Replacingpurgebulb
{Removing}
1. Remove air cleaner cover and air lter (Refer to
“4-1 Inspecting air lter” ).
2. Remove carburetor elbow and carburetor (Refer
to “4-9 Testing carburetor” ).
3. Press leg (a1) of purge bulb (A) with screwdriver
to remove purge bulb (A) from rear handle.
4. Disconnect parge line (B) and fuel return line (C)
from purge bulb (A).
{Installing}
5. Connect fuel return line (C) to longer tting (a2)
of purge bulb (A). Connect purge line (B) to shorter
tting (a3) of purge bulb (A).
6. Push purge bulb (A) into rear handle.
7. Reassemble removed parts (Refer to “4-15 In-
stalling carburetor”).
A
a1
A
C
B
C
a2
a3
B