Eclipse 500 - Page 335

Section 14. Primary Flight Display (PFD) Eclipse 5OO Systems Manual
Copyright © — Eclipse Aviation Corporation
Version 2.0 April 2007 315

Line Select Keys and Concentric Knob (LEFT)
Left-side line select keys provide selection of navigational sources for the HSI
course pointer / D-bar and RMI pointers. Line select key five provides various
view and range options for Tile 4 data overlay using the left concentric knob.
Line Select Key 1,
NAV
Primary NAV source select ...................................................................VLOC 1
VLOC 2
FMS
OFF
Line Select Key 2,
BRG
Secondary NAV source select ..............................................................VLOC 1
VLOC 2
FMS
OFF
Line Select Key 3
NO FUNCTION
Line Select Key 4
NO FUNCTION
Line Select Key 5
View/Range......................................... Pressing View Range allows use of left
concentric knob to select range and view.
Concentric Knob (LEFT)
Inner Knob................................ When VIEW/RANGE is selected, pressing the
inner knob changes HSI view from full to 120° arc.
Outer Knob.......................................When VIEW/RANGE is selected, rotating
the outer knob changes the NM value of the
inner and outer range rings on the HSI.