Page 28 of 51
EFW5L_IFU REV NEW
g. Ensure that the number displayed is set to “3.” If it is not, press the “+” or “–”
buttons to increase or decrease the number displayed until it is set to “3.”
h. Press the right arrow button to enter the Password Enable submenu. (“Off” will be
selected in a red font.)
i. Press the right arrow button to enter the Read Lock submenu.
j. Ensure that the number displayed is set to “2.” If it is not, press the “+” or “–”
buttons to increase or decrease the number displayed until it is set to “2.”
k. Slowly press the right arrow button to enter the Write Security submenu.
To Next Page
Loading...