Ecotech HiVol 3000

Maintenance HiVol 3000 User manual 1.7
70
6.3.7 Hidden Menu
The Hidden Menu is used to set parameters at the factory. It is not usually
necessary to access the Hidden Menu.
Diagnostics only
Diagnostics only
Enter a HiVol identification number
0=mm/dd/yyyy (USA)
1=dd/mm/yyyy (common)
2=yyyy/mm/dd (Japan)
dd: day, mm: month, yyyy: year
Flow calibration coefficient 0
Flow calibration coefficient 1
Flow calibration coefficient 2
Temperature calibration coefficient 0
Temperature calibration coefficient 1
Temperature calibration coefficient 2
Baro. pressure calibration coefficient 0
Baro. pressure calibration coefficient 1
Wind speed calibration coefficient 0
Wind speed calibration coefficient 1
Wind direction calibration coefficient 0
Wind direction calibration coefficient 1
Power up voltage*
Resets all hidden menu parameters!
Rain gauge or Wind sensor selection
Factory setting – do not adjust!
Figure 22 Hidden menu
* Power down voltage is 90% of power up voltage value.
To access the Hidden Menu, hold down the secret key (the first letter C in the
ECOTECH logo), then press the Select key at the same time.
Test Menu 
Voltages

ID 0
Date Format 1
Flow coeff0 0.7201
Flow coeff1 -0.021
Flow coeff2 0.0003
Temp coeff0 0.381
Temp coeff1 0.0192
Temp coeff2 0.0007
Pres. coeff0 73.
Pres. coeff1 168.7
WS coeff0 0
WS coeff1 0.7989
WD coeff0 0
WD coeff1 79.1
Min 12V 12.
Default Prms

0=RG, 1=WS 1
Inst. T
yp
e 1