4.9.14 Storing Interval (1-240minutes Selectable)
4.9.15 Weather Server
You may jump to section 4.9.16 now to have your console connected with
your Wi-Fi network first. Then back to section 4.9.15 to have cloud data
hosting setup completed.
Your console is capable of sending your sensor data to select internet-based
weather services. The supported services are shown in the table below:
Site: https://wunderground.com
provides local & long-range weather forecasts,
weather reports, maps & tropical weather conditions
for locations worldwide.
Site: https://wow.metoffice.gov.uk
A UK based weather observation website.
Site: https://weathercloud.net
A large network of weather stations reporting data in
real time from all over the world.
Site: https://www.ecowitt.net
Ecowitt’s new weather server that can host a bunch
of sensors that other services don’t support at this
time.
Table 7: Supported weather services
Note: If you are testing the setup with the outdoor sensor package nearby
and indoor, you may want to consider connecting to Wi-Fi, but not yet
configuring any of the weather services. The reason is that while indoor the
temperatures and humidity recorded by the outdoor sensor, and as reported
to the weather service(s) will reflect indoor conditions, and not outdoor
conditions. Therefore, they will be incorrect. Furthermore, the rainfall
bucket may be tripped during handling, causing rain to register while it may
not actually have been raining. One way to prevent this is to follow all
instructions, except to use an incorrect password, on purpose! Then, after
To Next Page
Loading...
