ECOWITT HP2553CA - Unpacking

4
2 Unpacking
Open your weather station box and inspect that the contents are intact
(nothing broken) and complete (nothing missing). Inside you should find the
following:
QTY
Item Description
1
Display Console
1
Indoor sensor unit(temp/humidity/pressure)
1
Solar powered ultrasonic anemometer with Light and UV, air
temperature/humidity sensor integrated (optional heater for
climate with snow/ice conditions available)
1
Rain gauge
2
U-Bolts set for mounting on a pole (2pcs/set)
2
Threaded nuts for U-Bolts set (M6 size) (4pcs/set)
1
Metal mounting plate set to be used with U-Bolts (1pcs/set)
1
Mounting arm for ultrasonic anemometer
1
Mounting bracelet for ultrasonic anemometer
1
Mini wrench for M6 bolts
1
Stainless steel filter for rain gauge collector
1
AC adapter
1
User manual (this manual)
1
3M extension cord
Table 1: Package content
If any component is missing from the package, or broken, please contact our
Customer Service department to resolve the issue.
Note: The console operates using an AC adapter. The included adapter is a
switching-type adapter and can generate a small amount of electrical
interference with the RF reception in the console, when placed too
close to the console. Please keep the console display at least 2ft. or
0.5m away from the power adapter to ensure best RF reception from
the outdoor sensor package.