1. Confirm your password is correct. It is the
password you registered on
Wunderground.com. Your Wunderground.com
password cannot begin with a non-
alphanumeric character (a limitation of
Wundeground.com, not the station). Example,
$oewkrf is not a valid password, but oewkrf$ is
valid.
2. Confirm your station ID is correct. The station
ID is all caps, and the most common issue is
substituting an O for a 0 (or visa versa).
Example, KAZPHOEN11, not KAZPH0EN11
3. If there's a number “1" on the station key,
try to input the lower case of letter “L” to
replace it.
4. Make sure the date and time is correct on the
console. If incorrect, you may be reporting old
data, not real time data.
5. Make sure your time zone is set properly. If
incorrect, you may be reporting old data, not
real time data.
6. Check your router firewall settings. The
console sends data via Port 80.
1. Check for WiFi signal strength symbol on the
display . If wireless connectivity is
successful and reporting to
Wunderground.com, the WiFi icon will
be displayed the home page.
2. Make sure your modem WiFi settings are
correct (network name, password and security
settings).
To Next Page
Loading...
