ECOWITT HP2553CA - Page 96

96
Note:
 When the maximum wind speed of the last 4s is >=5m/s, the wind
speed is detected by 1s; when the maximum wind speed of the last
4s is >=3m/s and less than 5m/s, the wind speed is detected by every
2s; when the maximum wind speed of the last 4s is less than 3m/ s,
the wind speed is detected by every 4s for saving energy.
 The wind speed reading will be a real-time value (The latest
sampling data will be reporting to the receiver).
 The wind gust reading will be the max wind speed in the past 28s.
 When the wind speed is lower than 5m/s, the dispersion of wind
direction will increase.
Indoor sensor
Specification
Temperature range
-10°C – 60°C (14°F - 140°F)
Temperature resolution
0.1°C, or 0.1°F
Humidity range
10% ~ 99%
Humidity resolution
1%
Barometric pressure range
300 – 1,100 hPa (8.85 – 32.5 inHg)
Barometric pressure accuracy
± 3 hPa in 700 – 1,100 hPa range
Barometric pressure resolution
0.1 hPa (0.01 inHg)
Sensor reporting interval
60 seconds
Alarm Duration
120 seconds
Table 10: Indoor sensor specification
Power
Specification
Base station/console
5V DC Adapter (included)
Indoor sensor
2 x AA 1.5 Alkaline batteries (not included)
Rain gauge sensor
1 x AA 1.5V LR6 Alkaline (not included), or
1 x AA 1.5V Lithium battery (not included)
Anemometer sensor
Solar panel (built-in): 6.5V/4mA
Anemometer sensor
(backup)
2 x AA 1.5V Lithium battery (not included)
Table 11: Power specification