EDAN SE-12 Express - Page 23

SE-12 Series Electrocardiograph User Manual Introduction
- 17 -
Name
Explanation
C
Gender Key
Press to quickly select the gender for the patient when Gender is
selected in the Patient Information Setup window.
D
Delete Key
Press to delete characters.
E
Age Group Key
Press to quickly select the age group on the main screen when you
set Age to Age Group in the Patient Information Setup window.
F
Enter
Press to confirm operation.
G
Tab/Feed paper
Press to move the cursor:
Pressing Tab can move the cursor forward, and pressing Shift + Tab
can move the cursor backward.
Press to feed paper:
If Paper Marker is set to Yes, pressing Tab can advance the recorder
paper to the next black marker; if Paper Marker is set to No, pressing
Tab can advance the paper for 2.5cm. Pressing Tab again can stop
advancing the paper.
For SE-1201, press FEED to feed paper.
H
Fn
Press Fn and a letter key to type special characters.
Pressing Fn + a can type è.
I
Arrow Keys
Press to move the cursor or switch between options.
J
PRINT/STOP
Press to start or stop printing reports
Pressing Shift + PRINT/STOP can quickly enable or disable the print
out function in the auto or rhythm mode.
K
1mV/COPY
In the manual mode, pressing the 1mV/COPY key can insert a 1mV
calibration mark during the printing course.
In the auto, rhythm or VCG mode, pressing the 1mV/COPY key can
print the ECG report which was printed out last time.
L
SLEEP/WAKE UP
Press to rest/waken the electrocardiograph
M
MODE
Press to select a working mode among the auto, manual, rhythm, R-R
analysis and VCG modes.
NOTE: Only if a working mode is selected in the Work Mode Setup
window, can the working mode be selected by pressing the
MODE key when the main screen is displayed.
N
Power On/Off
Power-on/Power-off