Edge-Core ES4612 - Figure 3-35 802.1 X Information

User Authentication
3-59
3
Web – Click 802.1x, Information.
Figure 3-35 802.1X Information
CLI – This example shows the default protocol settings for dot1x. For a description
of the additional entries displayed in the CLI, see “show dot1x” on page 4-85.
Console#show dot1x 4-85
Global 802.1X Parameters
reauth-enabled: yes
reauth-period: 300
quiet-period: 350
tx-period: 300
supp-timeout: 30
server-timeout: 30
reauth-max: 2
max-req: 2
802.1X Port Summary
Port Name Status Operation Mode Mode Authorized
1/1 disabled Single-Host ForceAuthorized n/a
1/2 disabled Single-Host ForceAuthorized n/a
.
.
.
1/23 disabled Single-Host ForceAuthorized yes
1/24 enabled Single-Host Auto yes
802.1X Port Details
802.1X is disabled on port 1
.
.
.
802.1X is enabled on port 24
Status Authorized
Operation mode Single-Host
Max count 5
Port-control Auto
Supplicant 00-e0-29-94-34-65
Current Identifier 4
Authenticator State Machine
State Authenticated
Reauth Count 0