Basic Configuration
3-13
3
These additional parameters are displayed for the CLI.
• Unit ID – Unit number in stack.
• Redundant Power Status – Displays the status of the redundant power supply.
Web – Click System, Switch Information.
Figure 3-4 Switch Information
CLI – Use the following command to display version information.
Console#show version 4-62
Unit1
Serial number : A322043872
Hardware version : R01
Number of ports :12
Main power status :up
Redundant power status :down
Agent (master)
Unit ID : 1
Loader version : 2.1.0.0
Boot ROM version : 2.0.2.1
Operation code version : 1.0.2.5
Console#
To Next Page
Loading...
