Edge-Core ES4612 - Authentication Dot1 X Default; Dot1 X Default; Dot1 X Max-Req

Command Line Interface
4-80
4
authentication dot1x default
This command sets the default authentication server type. Use the no form to
restore the default.
Syntax
authentication dot1x default radius
no authentication dot1x
Default Setting
RADIUS
Command Mode
Global Configuration
Example
dot1x default
This command sets all configurable dot1x global and port settings to their default
values.
Syntax
dot1x default
Command Mode
Global Configuration
Example
dot1x max-req
This command sets the maximum number of times the switch port will retransmit an
EAP request/identity packet to the client before it times out the authentication
session. Use the no form to restore the default.
Syntax
dot1x max-req count
no dot1x max-req
count – The maximum number of requests (Range: 1-10)
Default
2
Console(config)#authentication dot1x default radius
Console(config)#
Console(config)#dot1x default
Console(config)#