Edge-Core ES4612 - Figure; Table

Configuring the Switch
3-6
3
Rate Limit 3-96
Input Port Configuration Sets the input rate limit for each port 3-96
Input Trunk Configuration Sets the input rate limit for each trunk 3-96
Output Port Configuration Sets the output rate limit for each port 3-96
Output Trunk Configuration Sets the output rate limit for each trunk 3-96
Port Statistics Lists Ethernet and RMON port statistics 3-97
Address Table 3-101
Static Addresses Displays entries for interface, address or VLAN 3-101
Dynamic Addresses Displays or edits static entries in the Address Table 3-102
Address Aging Sets timeout for dynamically learned entries 3-104
Spanning Tree 3-104
STA
Information Displays STA values used for the bridge 3-105
Configuration Configures global bridge settings for STA, RSTP and MSTP 3-108
Port Information Displays individual port settings for STA 3-112
Trunk Information Displays individual trunk settings for STA 3-112
Port Configuration Configures individual port settings for STA 3-115
Trunk Configuration Configures individual trunk settings for STA 3-115
MSTP
VLAN Configuration Configures priority and VLANs for a spanning tree instance 3-117
Port Information Displays port settings for a specified MST instance 3-120
Trunk Information Displays trunk settings for a specified MST instance 3-120
Port Configuration Configures port settings for a specified MST instance 3-121
Trunk Configuration Configures trunk settings for a specified MST instance 3-121
VLAN 3-123
802.1Q VLAN
GVRP Status Enables GVRP VLAN registration protocol 3-126
Basic Information Displays information on the VLAN type supported by this switch 3-126
Current Table Shows the current port members of each VLAN and whether or
not the port is tagged or untagged
3-127
Static List Used to create or remove VLAN groups 3-128
Static Table Modifies the settings for an existing VLAN 3-129
Table 3-2 Switch Main Menu (Continued)
Menu Description Page