Edge-Core ES4612 - TACACS+ Client; Table 4-29 TACACS+ Client Commands; Tacacs-Server Host

Authentication Commands
4-75
4
Example
TACACS+ Client
Terminal Access Controller Access Control System (TACACS+) is a logon
authentication protocol that uses software running on a central server to control
access to TACACS-aware devices on the network. An authentication server
contains a database of multiple user name/password pairs with associated privilege
levels for each user or group that require management access to a switch.
tacacs-server host
This command specifies the TACACS+ server. Use the no form to restore the
default.
Syntax
tacacs-server host host_ip_address
no tacacs-server host
host_ip_address - IP address of a TACACS+ server.
Default Setting
10.11.12.13
Command Mode
Global Configuration
Example
Console#show radius-server
Server IP address: 10.1.0.1
Communication key with radius server:
Server port number: 1812
Retransmit times: 2
Request timeout: 5
Console#
Table 4-29 TACACS+ Client Commands
Command Function Mode Page
tacacs-server host Specifies the TACACS+ server GC 4-75
tacacs-server port Specifies the TACACS+ server network port GC 4-76
tacacs-server key Sets the TACACS+ encryption key GC 4-76
show tacacs-server Shows the current TACACS+ settings GC 4-77
Console(config)#tacacs-server host 192.168.1.25
Console(config)#