Edge-Core ES4612 - Page 25

xxv
Figures
Figure 3-1 Home Page 3-2
Figure 3-2 Front Panel Indicators 3-3
Figure 3-3 System Information 3-11
Figure 3-4 Switch Information 3-13
Figure 3-5 Bridge Extension Configuration 3-14
Figure 3-6 IP Interface Configuration - Manual 3-16
Figure 3-7 Default Gateway 3-17
Figure 3-8 IP Interface Configuration - DHCP 3-18
Figure 3-9 Copy Firmware 3-20
Figure 3-10 Setting the Startup Code 3-20
Figure 3-11 Deleting Files 3-21
Figure 3-12 Copy Configuration Settings 3-23
Figure 3-13 Setting the Startup Configuration Settings 3-23
Figure 3-14 Configuring the Console Port 3-25
Figure 3-15 Configuring the Telnet Interface 3-27
Figure 3-16 System Logs 3-29
Figure 3-17 Remote Logs 3-31
Figure 3-18 Displaying Logs 3-32
Figure 3-19 Resetting the System 3-32
Figure 3-20 SNTP Configuration 3-33
Figure 3-21 Clock Time Zone 3-34
Figure 3-22 Enabling the SNMP Agent 3-36
Figure 3-23 Configuring SNMP Community Strings 3-37
Figure 3-24 Configuring SNMP Trap Managers 3-38
Figure 3-25 Setting the SNMPv3 Engine ID 3-39
Figure 3-26 Configuring SNMPv3 Users 3-40
Figure 3-27 Configuring SNMPv3 Groups 3-42
Figure 3-28 Configuring SNMPv3 Views 3-43
Figure 3-29 User Accounts 3-45
Figure 3-30 Authentication Server Settings 3-47
Figure 3-31 HTTPS Settings 3-49
Figure 3-32 SSH Host-Key Settings 3-53
Figure 3-33 SSH Server Settings 3-54
Figure 3-34 Port Security 3-56
Figure 3-35 802.1X Information 3-59
Figure 3-36 802.1X Configuration 3-61
Figure 3-37 802.1X Port Configuration 3-62
Figure 3-38 802.1X Statistics 3-63
Figure 3-39 IP Filter 3-65
Figure 3-40 ACL Configuration 3-67
Figure 3-41 ACL Configuration - Standard IP 3-68