Command Line Interface
4-122
4
Default Setting
Default groups: public
26
(read only), private
27
(read/write)
readview - Every object belonging to the Internet OID space (1.3.6.1).
writeview - Nothing is defined.
Command Mode
Global Configuration
Command Usage
• A group sets the access policy for the assigned users.
• When authentication is selected, the MD5 or SHA algorithm is used as
specified in the snmp-server user command.
• When privacy is selected, the DES 56-bit algorithm is used for data encryption.
Example
26. No view is defined.
27. Maps to the defaultview.
Console(config)#snmp-server group r&d v3 auth write daily
Console(config)#
To Next Page
Loading...
