EasyManua.ls Logo

Edgewater Networks 4200 Series - User Manual

Edgewater Networks 4200 Series
109 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
4200 Series
Converged Network Appliance
User Manual
Edgewater Networks, Inc.
2730 San Tomas Expressway
Suite 200
Santa Clara, Ca. 95051
Phone: 408.351.7200
info@edgewaternetworks.com

Table of Contents

Other manuals for Edgewater Networks 4200 Series

Question and Answer IconNeed help?

Do you have a question about the Edgewater Networks 4200 Series and is the answer not in the manual?

Summary

Introduction to the 4200 Series Appliance

4200 Series Appliance Features

Provides an overview of the key functionalities and capabilities of the 4200 converged network appliance.

Front and Back Panel Overview

Details the physical interface elements, LEDs, and ports on the front and back of the 4200 device.

Getting Started with the 4200

Physical Installation and Initial Connection

Provides guidance on physically installing the 4200 and establishing initial network connectivity and configuration access.

Network Configuration

LAN and WAN Interface Setup

Configures IP addresses, subnet masks, DNS, and default gateway for LAN and WAN network interfaces.

VoIP ALG and Protocol Settings

Sets up the VoIP Application Layer Gateway and configures SIP, MGCP, and H.323 protocols.

NAT and Firewall Security

Manages Network Address Translation (NAT) and configures firewall rules for network security.

DHCP Server and Relay Configuration

Configures the 4200 as a DHCP server or relay for automatic IP address assignment.

Traffic Management and QoS

Manages network traffic prioritization, bandwidth, shaping, and Call Admission Control (CAC).

System Management and Maintenance

System Information and Diagnostics

Accesses system status, software versions, hardware details, and diagnostic tools for troubleshooting.

Configuration Backup and Restore

Covers saving, loading, and managing device configurations using backup files and commands.

Firmware Upgrade Procedure

Provides instructions for upgrading the 4200's software and firmware.

Summary

Introduction to the 4200 Series Appliance

4200 Series Appliance Features

Provides an overview of the key functionalities and capabilities of the 4200 converged network appliance.

Front and Back Panel Overview

Details the physical interface elements, LEDs, and ports on the front and back of the 4200 device.

Getting Started with the 4200

Physical Installation and Initial Connection

Provides guidance on physically installing the 4200 and establishing initial network connectivity and configuration access.

Network Configuration

LAN and WAN Interface Setup

Configures IP addresses, subnet masks, DNS, and default gateway for LAN and WAN network interfaces.

VoIP ALG and Protocol Settings

Sets up the VoIP Application Layer Gateway and configures SIP, MGCP, and H.323 protocols.

NAT and Firewall Security

Manages Network Address Translation (NAT) and configures firewall rules for network security.

DHCP Server and Relay Configuration

Configures the 4200 as a DHCP server or relay for automatic IP address assignment.

Traffic Management and QoS

Manages network traffic prioritization, bandwidth, shaping, and Call Admission Control (CAC).

System Management and Maintenance

System Information and Diagnostics

Accesses system status, software versions, hardware details, and diagnostic tools for troubleshooting.

Configuration Backup and Restore

Covers saving, loading, and managing device configurations using backup files and commands.

Firmware Upgrade Procedure

Provides instructions for upgrading the 4200's software and firmware.

Edgewater Networks 4200 Series Specifications

General IconGeneral
BrandEdgewater Networks
Model4200 Series
CategoryNetwork Router
LanguageEnglish

Related product manuals