Edgewater Networks 4200 Series - File Server

4200 User Manual Edgewater Networks, Inc.
Version 3.0 35
⇒ Select Add/Delete
 Note: To delete an entry you must enter the Proxied fields and
select Delete.
File Server
In some instances, a public TFTP server is not available. Enabling the TFTP
server allows configuration and image files to be downloaded from the system
by using the TFTP protocol. Configuration and image files can be pushed to
the system by a management station using a secure protocol. These files are
then served out when an endpoint requests them.
⇒ Select System --

 Select File Server --

 The File Server page is used to
enable and configure a TFTP file server on the system. The file server is used
to store phone configuration information. Enabling the TFTP server will disable
the TFTP ALG. Files that are stored on the server are stored in RAM. The files
will be lost when the system is rebooted or a Submit is pressed on this page.
 Note; that either the TFTP ALG or TFTP server can be enabled.
Enabling the TFTP server automatically disabled the TFTP ALG function.
By default, the TFTP ALG is enabled and the TFTP server is disabled.
o Enable TFTP Server --

 Check this box to enable the TFTP Server.
o RAMDISK Size --

 Select the size of the systems RAMDISK, values
are in Kbps.
☞ 512Kbps
☞ 1024Kbps
☞ 2048Kbps
☞ 4096Kbps
☞ 8192Kbps
☞ 16384Kbps
⇒ Select Submit