Edgewater Networks 4200 Series - Clients List

4200 User Manual Edgewater Networks, Inc.
Version 3.0 41
 Note; When using your local PC as the FTP server the systems
expect the <filename> to be in /pub/e_4200
⇒ Select Submit
Clients List
The clients lists contain entries for devices that have registered with the
system. The displayed clients can be filtered, sorted, queried for information,
and deleted. It is also possible to add clients to the clients list.
Currently, MGCP clients can be added and deleted without restarting the
system but changes to SIP or H.323 clients list will automatically restart the
system.
 Use caution! All calls that are in progress will be interrupted.
⇒ Select System --

 Select Clients List --

 The icons in the first column of
the clients list allows you to delete clients (trashcan)
, show more
information about the client (info)
which shows that the client has not
responded to audits for the given amount of time (warning, only for
supported protocols).
o Protocol to Display --

 Select the Protocol for the clients that you
wish to display.
☞ SIP
☞ MGCP
☞ H.323
o SIP --

 By default when you enter the Clients List page you will
be on the SIP page.
o Clients List Filter --

 Enter the IP Address, Port, Name for
the client that you wish to search for.
⇒ Select the to delete a SIP Client
⇒ Select the to see current information about the SIP
Client.
☞ Address --

 IP Address of the SIP client.
☞ Registered --

 When the SIP client last registered
to the system.