4200 User Manual Edgewater Networks, Inc.
Version 3.0 55
Chapter 4: Configuring the 4200
The 4200 is a flexible, easy to use converged network appliance that provides
many critical networking functions for IP based voice and data. It can be
installed in several different VoIP topologies:
At the customer premise for IP Centrex applications
At the station side of enterprise IP PBXs
At the trunk side of enterprise IP PBXs
Most users will follow the steps provided in the “Configuring The Systems
Settings” section of this manual to initially connect the 4200 into their IP
network. The remainder of the configuration can be different based on the
application, VoIP topology and presence of other networking equipment such
as firewalls or DHCP servers. In general, however, the steps used to
configure the 4200 are:
Step Task
1 System configuration
2 VoIP configuration
3 Data networking configuration
4 Firewall configuration
5 Traffic management configuration
Some of the steps are optional depending on your particular application. We
have provided configuration guidelines below for each of the application types
supported by the 4200. Additional application notes can be found on our
website at www.edgewaternetworks.com.
To Next Page
Loading...
