4200 User Manual Edgewater Networks, Inc.
Version 3.0 8
Front Panel LEDs
The LEDs display real-time information for key functions of the 4200. They are as
follows:
LED Label Activity Description
Power On 5 volts DC power is supplied to the unit
Status On A system fault condition has been detected. Please contact
Edgewater technical support.
WAN Link/Act Flashing Indicates data traffic sent/received by appliance on the WAN
LAN Link/Act Flashing Indicates data traffic sent/received by appliance on the LAN
100Mbps On Indicates Ethernet link rate of 100Mbps
Back Panel
The back panel of the 4200 contains the following:
Power connector
LAN Ethernet ports
WAN Ethernet port
Erase/Reset switch
Serial console port
Power Connector
The 4200 comes with an AC power cord and 5vdc, 3.0 Amp power adapter for
connecting to this port.
LAN Ethernet port
The 4200 series LAN interface is a 4-port switch that uses a single IP address.
The LAN Ethernet ports are 10/100 auto sensing ports that should be
To Next Page
Loading...
