4200 User Manual Edgewater Networks, Inc.
Version 3.0 37
System Information
System Information displays detailed information regarding the operating
system running on the system. Customer support may ask you to examine or
forward this information when troubleshooting problems with the system.
⇒
Select System --
Select System Information (view only)--
System
Information displays detailed operating system and device information.
o System Uptime (view only) --
System Uptime displays the current
time, the amount of time elapsed since the last system reboot, and the
system load averages for the past 1, 5, and 15 minutes. Uptime can
help trace when power outage may have interrupted service. Load
averages that remain greater than 2 indicate excessive system loading
and could indicate over provisioning of the ALG feature.
o Number of Active Streams (view only) --
The number of active
streams indicates how many calls are using the WAN link. Calls that
are in progress and between two devices on the system LAN are not
counted in this number.
o Recent Call Log (view only) --
The Recent Call Log displays
quality information for calls that are in progress or have recently
completed. If a call falls below the configured MOS Threshold, a
system log message will be created. The MOS score for a call is always
displayed when the call is completed. Detailed statistics for the call are
reported in the Advanced MOS syslog message.
o Process Information (view only) --
Process Information displays
detailed process table information that may be of use to technical
support.
o Memory Usage (view only) --
Memory Usage displays detailed
memory allocation information that may be of use to technical support.
o System Logging Messages (view only) --
System Logging
Messages displays information logged during system boot and normal
operation. Logging messages may indicate unauthorized attempts to
access the system, process restart messages, and excess resource
utilization messages.
To Next Page
Loading...
