4200 User Manual Edgewater Networks, Inc.
Version 3.0 12
Connecting to the 4200
The 4200 is configured using a web browser such as Internet Explorer or
Netscape Navigator. The 4200 is shipped with a pre-configured IP address for
its LAN port of 192.168.1.1. To connect to the 4200, do the following:
A. Connect a PC to one of the LAN ports of the 4200 using an IP address of
192.168.1.2 and subnet mask of 255.255.255.0 to one of the 4200 LAN
ports.
B. Launch a web browser on
the PC and enter the URL
string:
http://192.168.1.1. Press
Return. The initial 4200
main configuration menu
appears.
C. Select the Network link -
enter the username root
and the password default to
log into the system.
D. Continue to configure the
system using the information
provided in “Chapter 4:
Configuring the 4200”.
To Next Page
Loading...
