4200 User Manual Edgewater Networks, Inc.
Version 3.0 19
o Audit Cycle Interval (m) --
Audit Cycle Interval specifies how
often these messages should be sent out to the clients. Each cycle, all
endpoints will be audited so the rate of messages being sent is
dependent on the number of clients currently registered. The value is
entered in minutes. The default value is 15 minutes.
o Stale Time (m) --
Stale Time value is used to decide when a client
is supposed to be deemed stale, or unavailable. The value is entered in
minutes. The default value is 1440 minutes.
o Prevent Stale Registration --
Prevent stale re-registration flag
can be used to disable the automatic MGCP re-registration feature for
stale clients.
o Automatic Client Deletion --
Automatic Client Deletion will
delete clients that has been unavailable for a given period of time.
o Deletion Time (m) --
Automatic Client Deletion will delete
clients that has been unavailable for a given period of time and the
Deletion Time specifies this time.
⇒
Select Submit
H.323 Settings
⇒
Select VoIP ALG
⇒
Select H.323
Specify the Gatekeeper mode by selecting the desired mode. If "No
gatekeeper" is selected, H.323 processing will be disabled. "WAN/Provider-
side gatekeeper" mode will cause the system to forward all client RAS
messages to the gatekeeper. "LAN/Subscriber-side gatekeeper" will forward
all incoming calls to the gatekeeper. "Embedded gatekeeper" mode will cause
the system to act as a gatekeeper itself.
o WAN/Provider-Side Gatekeeper Settings --
If "WAN/Provider-
side gatekeeper" mode is selected, the WAN/Provider-side
gatekeeper settings must be configured. The IP address of the
gatekeeper should be entered under WAN/Provider-side GK address.
o LAN/Subscriber-Side Gatekeeper Settings --
If
"LAN/Subscriber-side gatekeeper" mode is selected, the
LAN/Subscriber-side gatekeeper settings must be configured. The
IP address of the gatekeeper should be entered under LAN/Subscriber-
side GK address.
o Embedded Gatekeeper --
If "Embedded gatekeeper" mode is
selected, the Embedded gatekeeper settings must be configured.
☞
Time-To-Live value specifies how long an endpoint's
registration should be valid.
To Next Page
Loading...
