Edgewater Networks 4200 Series - Page 25

4200 User Manual Edgewater Networks, Inc.
Version 3.0 25
access. This will drop all traffic destine for this host and port to this
host.
☞ Multiple IP and port values can be enter by separating the
values with a space e.g. 10.10.10.10-80 11.11.11.11-80 or for
the entire subnet 10.10.10.0/24-80 11.11.11.0/24-80
o Deny Hostwise UDP (IP-Port) --

 Enter the UDP IP address and
Port on the LAN side device of the host to which you want to deny
access. This will drop all traffic destine for this host and port to this
host.
☞ Multiple IP and port values can be enter by separating the
values with a space e.g. 10.10.10.10-80 11.11.11.11-80 or for
the entire subnet 10.10.10.0/24-80 11.11.11.0/24-80
o Allow Hostwise TCP (IP-Port) --

 Enter the TCP IP address and
Port on the LAN side device of the host to which you want to allow
access. This will forward all traffic destine for this host and port to this
host.
☞ Multiple IP and port values can be enter by separating the
values with a space e.g. 10.10.10.10-80 11.11.11.11-80 or for
the entire subnet 10.10.10.0/24-80 11.11.11.0/24-80
o Allow Hostwise UDP (IP-Port) --

 Enter the UCP IP address and
Port on the LAN side device of the host to which you want to allow
access. This will forward all traffic destine for this host and port to this
host.
☞ Multiple IP and port values can be enter by separating the
values with a space e.g. 10.10.10.10-80 11.11.11.11-80 or for
the entire subnet 10.10.10.0/24-80 11.11.11.0/24-80
⇒ Select Submit