Edgewater Networks 4200 Series - Page 43

4200 User Manual Edgewater Networks, Inc.
Version 3.0 43
o Add a MGCP Client to the Clients List --

 Some clients in
advanced configurations may require adding a static client e.g.
adding POTS gateway that cannot register, IP PBX that cannot
register.
o Name --

 Enter the Name of the device you are adding,
typically this is the same as the MGCP device name assigned to
the IP phone.
o Address --

 Static IP address of the SIP client that you are
adding.
⇒ Select Submit
o H.323 --

 Click on the H.323 link on the top of this page to view
the H.323 clients list.
o Clients List Filter --

 Enter the IP Address, RAS Port,
Q.931 Port, Alias for the client that you wish to search for.
⇒ Select the to delete a H.323 Client
⇒ Select the to see current information about the H.323
Client.
☞ H.323 --

 Displays the H.323 alias of the H.323
client.
☞ E.164 --

 Displays the E.164 alias of the H.323
client.
☞ Last RRQ --

 Displays the Last RRQ (registration
request) of the H.323 client.
o Add a H.323 Client to the Clients List --

 Some H.323
clients are unable to register to a gatekeeper, enter the fields
below to add a static H.323 client.
o Address --

 Static IP address of the H.323 client that you are
adding.
o Q.931 Port --

 Enter the Q.931 call signaling port on which
the endpoint will send call setup to, the H.323 well known port
is 1720
o RAS Port --

 Enter the RAS (registration, admission and
status) port on which the endpoint will RAS to, the H.323 well
known port is 1719.
o Alias --

 Enter the H.323 or E.164 alias for the static client
that you are adding.