Edgewater Networks 4200 Series

To Next Page

To Previous Page

4200 User Manual Edgewater Networks, Inc.

Version 3.0 76

options on the phone to the “Unlock Configuration” option.To change a parameter,

enter * * # on the telephone.

F. Under settings, select MGCP configurations.

G. Set the Media Gateway Controller address = the LAN IP address of the

4200 (egg. 192.168.1.1).

PLEASE note: The 4200 forwards signaling messages sent to this address by the

phone to the MGCP Server IP Address configured in step B of the “Configuring The

VoIP ALG” section of this guide.

H. Save and Reboot the telephone.

The phone should now register with the 4200. To complete the installation a one-

time activation code may be required by the network based softswitch or IP PBX.

Please consult your service provider or IT administrator for additional information.

Edgewater Networks 4200 Series - Page 76