4. Use a Wi-Fi device (e.g. computer, tablet, smartphone) to search for a
Wi-Fi network with the SSID “edimax.setup” or “edimax.setup5G” and
connect to it.
iOS 4 or Android 4 and above are required for setup on a
smartphone or tablet.
5. Open a web browser and if you do not automatically arrive at the “Get
Started” screen shown below, enter the URL http://edimax.setup and click
“Get Started” to begin the setup process.
If you cannot access http://edimax.setup, please make sure your
Wi-Fi device is set to use a dynamic IP address. This is a simple
procedure and step-by-step instructions to do this on a computer
can be found in IV. Appendix.
To Next Page
Loading...
Need help?
General
