III-3-5-2. 5GHz Wireless
These settings are for experienced users only. Please do not change any of the
values on this page unless you are already familiar with these functions.
Set the Fragment threshold of the wireless
radio. The default value is 2346.
Set the RTS threshold of the wireless radio.
The default value is 2347.
Set the beacon interval of the wireless radio.
The default value is 100.
Set the DTIM period of wireless radio. The
default value is 3.
Set the wireless data transfer rate. The
default is set to Auto.
Set the data rate of 802.11n. The default is
set to Auto.
Select wireless channel width (bandwidth
used by wireless signals from the device) –
the recommended value is 20/40/80MHz.
To Next Page
Loading...
Need help?
General
