III. Browser Based Configuration Interface
After you have setup the EW-7208APC as detailed in II. Installation or the
included Quick Installation Guide, you can use the browser based
configuration interface to configure advanced settings.
Please ensure that your computer is set to use a dynamic IP
address. Refer to IV-1. Configuring your IP address for more
information.
III-1. Login
1. To access the browser based configuration interface enter
http://edimax.setup into the URL bar of a browser on a network device
connected to the same Wi-Fi network as the EW-7208APC.
If you can not access http://edimax.setup, connect the device to a
computer using an Ethernet cable and try again.
2. You will be prompted for a username and password. The default
username is “admin” and the default password is “1234”.
To Next Page
Loading...
Need help?
General
