III-3-3. LAN
You can configure your Local Area Network (LAN) on
this page and modify the IP address of the device. The
device’s default IP address is 192.168.2.1. Select
“Obtain an IP address automatically” for the device to automatically get an IP
address from the router, or “Use the following IP address” to specify a static
IP address and then enter the details below.
You can access the browser based configuration interface using
the device’s IP address instead of using the URL
http://edimax.setup.
Specify the IP address here. This IP address
will be assigned to the EW-7208APC and will
replace the default IP address.
To Next Page