III-4-5-5. Schedule
The schedule feature allows you to automate the wireless radio to switch
on/off at specified times. Multiple schedules can be configured.
Check/uncheck the box “Enable Schedule Settings” to enable/disable the
wireless on/off scheduling function.
This function is not available in WISP mode for the wireless band
that is used to connect to WISP’s AP.
The EW-7208APC must remain connected to the Internet and use
an NTP server for the schedule feature to function correctly.
Wireless scheduling can save energy and increase the security of
your network.
1. Use the checkboxes to select which day(s) to include in the schedule.
2. Specify a time (hour and minute) for the schedule using the drop-down
menu.
To Next Page
Loading...
Need help?
General
