III-4-5-2. Guest
You can setup an additional “Guest” Wi-Fi network so guest users can enjoy
Wi-Fi connectivity without accessing your primary network. The “Guest”
screen displays settings for your guest Wi-Fi network.
The guest network is separate from your primary network. The
settings for your primary network can be found in the “Basic”
menu.
Check/uncheck the box to enable/disable the
guest Wi-Fi network.
Enter a reference/ID name for your guest
wireless network.
Enable Wireless
Clients Isolation
Check the box to enable wireless clients
isolation. This prevents wireless clients
connected to the EW-7208APC from
communicating with each other and improves
security. Typically, this function is useful for
corporate environments or public hot spots
and can prevent brute force attacks on clients’
usernames and passwords.
Displays the wireless standard used for the
EW-7208APC’s frequency band:
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and
802.11n wireless clients to connect to the
EW-7208APC.
Channel number for the guest network is the
same as the main SSID and cannot be adjusted
independently.
To Next Page
Loading...
Need help?
General
