III-4-6-3. DMZ
A Demilitarized Zone (DMZ) is an isolated area in your local network where
private IP addresses are mapped to specified Internet IP addresses, allowing
unrestricted access to the private IP addresses but not to the wider local
network.
You can define a virtual DMZ host here. This is useful for example, if a
network client PC cannot run an application properly from behind an NAT
firewall, since it opens the client up to unrestricted two-way access.
Check/uncheck the box to enable/disable the
device’s DMZ function.
Select “Dynamic IP” or “Static IP” here.
For “Dynamic IP” select an Internet connection
session from dropdown menu.
For “Static IP” enter the IP address that you
want to map to a specific private IP address.
Enter the private IP address that the internet IP
address will be mapped to.
Select a computer name from the list and click
“<<” to enter its IP address into the “Client PC”
field (above).
Click “Add” to add the client to the “Current
DMZ Table”.
To Next Page
Loading...
Need help?
General
