II. Installation
1. Screw in the included antennas to
the back of the EW-7208APC,
taking care to attach the two
2.4GHz antennas to the outside and
the 5GHz antenna to the center.
Each antenna is labeled on the base
with “2.4GHz” or “5GHz”.
2. Plug the included power adapter
into the device’s DC power port and the other end into an electrical socket.
3. Ensure that the Wi-Fi On/Off switch is set to on and that three LEDs
(power, 2.4GHz & 5GHz Wi-Fi)
display on.
To Next Page