III-3-4-2. Multiple SSID
The EW-7208APC supports up to four additional SSIDs for each wireless band
in access point mode. Once configured, these SSIDs are displayed in the
“Multiple SSID Status” table as shown below. Use the “Multiple SSID Basic
Settings” box to configure additional SSIDs.
Use the drop down menu to select which SSID
(numbered 1 – 4) to configure.
Wireless Network
Name (SSID)
Enter a reference/ID name to separate your
wireless network.
Check/uncheck this box to enable/disable the
specified SSID. Must be checked for the SSID to
function.
Enable Wireless
Clients Isolation
Check the box to enable wireless clients
isolation. This prevents wireless clients
connected to the EW-7208APC from
communicating with each other and improves
security. Typically, this function is useful for
corporate environments or public hot spots
To Next Page
Loading...
Need help?
General
