27
2.2.2 PPPoE
If the ISP requires you to connect to the Internet by PPPoE, you can specify PPPoE
username and password here.
The descriptions of every setting in this menu will be given below:
Item Description
Enable PPPoE Select ‘Enable’ to activate PPPoE function of this IP
camera, select ‘Disable’ to disable it.
User Name Input the PPPoE username assigned by your ISP here.
Password Input the PPPoE password assigned by your ISP here.
MTU Input the MTU (Maximum Transmission Unit) given by
your ISP here. Ask your ISP if you don’t know what value
you should input here, or use default value.
Click ‘Apply’ to save settings and make the new settings take effect.
To Next Page
Loading...
