39
2.4.2 MPEG4
If you selected ‘MPEG4’ as the video encoding format of this IP camera, you
can specify the parameters of MPEG4 video encoder here.
The descriptions of every setting in this menu will be given below:
Item Description
Video Resolution Specify video resolution of MPEG4 video encoder.
Available options are VGA and QVGA resolution. VGA
resolution provides more details than QVGA, but requires
more network bandwidth.
Video Quality 1. Specify video encoding rate of MPEG4 video
encoder.
2. CBR: Available options are from 200Kbps to 2Mbps.
Greater video bit rate provides better video quality,
but requires more network bandwidth.
3. VBR: Available from Lowest/ Low/ Normal/ High/
Highest
Video Frame
Rate
Specify video refresh rate of MPEG4 video encoder.
Higher video refresh rate provides more details about
motion, but requires more network bandwidth.
CAUTION: Choosing a low frame rate will save
bandwidth, but may not be able to capture every motion if
the object that IP camera points to is moving fast.
Click ‘Apply’ to save settings and make the new settings take effect.
To Next Page
Loading...
