43
The descriptions of every setting in this menu will be given below:
Item Description
Recipient E-Mail
Address
Input the email recipient’s Email address here.
SMTP Server Input the IP address or host name of the SMTP server
(the server that delivers the Email for you) here.
If you don’t know, please refer to the SMTP server you’re
using in your Email software (like Outlook, Outlook
Express etc.), or ask your network administrator or ISP.
Sender E-Mail
Address
Input the Email address of mail sender, this will help you
to identify the Email sent by this IP camera by sender’s
Email address.
NOTE: Some mail server would reject to deliver the
Email from unknown sender, it’s recommended to input
your own Email address here, or any other actual one.
SMTP
Authentication
Some SMTP server requires mail senders to be
authenticated before they can send Email. If your SMTP
server requires you to do so, please select ‘Enable’, or
select ‘Disable’ to disable it. If you don’t know, please
refer to the SMTP server you’re using in your Email
software (like Outlook, Outlook Express etc.), or ask your
network administrator or ISP.
User Name Please input the user name of SMTP server here, if your
SMTP server requires the use of authentication.
Password Please input the password of SMTP server here, if your
SMTP server requires the use of authentication.
Click ‘Apply’ to save settings and make the new settings take effect.
After that, you can click ‘Send a test email’ to send a testing Email to the address you
set here, so you can make sure the setting you specified here is correct and working.
To Next Page
Loading...
