47
The descriptions of every setting in this menu will be given below:
Item Description
Enable Motion
Detection
Select ‘Enable’ to start motion detection, and select
‘Disable’ to disabled it.
Next Event
Detected Interval
Specify the time interval between two motion detections
in seconds. If a motion is detected after last detection
time, and before next detection time, nothing will be send
by Email or via FTP.
Please specify a time interval that suites your need. If the
time interval is too long, you may not be able to know
what is happened between time interval; if the time
interval is too short, you may receive too much
unnecessary images, and consumes too much disk
storage spaces on Email and / or FTP server.
Recording Time Set the maximum recording time of a video clip when
motion is detected.
Send snapshot
file to Email
Select ‘Yes’ to send a picture to the Email address you
specified in ‘E-Mail & FTP’ menu when a motion is
detection, and select ‘No’ to disable this function.
E-Mail Subject Set the subject of Email being sent here. This will help
you to distinguish the Email sent by this IP camera from
others.
Send snapshot
file to FTP
Select ‘Yes’ to send a picture to the FTP server you
specified in ‘E-Mail & FTP’ menu when a motion is
detection, and select ‘No’ to disable this function.
Click ‘Apply’ to save settings and make the new settings take effect.
To Next Page
Loading...
