55
Please note: only one user (including administrator) will be able to view the image of
IP camera at the same time.
The descriptions of every setting in this menu will be given below:
Item Description
User (1 - 4) Select ‘Enable’ to enable this user (allow him / her to
login), and select ‘Disable’ to disallow him / her to login.
Selecting ‘Disable’ won’t erase the user name and
password, so you can select ‘disable’ to disallow a user
from logging in temporarily, without erasing it’s account
information.
Login Specify the user name here. Please use alphanumerical
characters (0 to 9, A to Z, and a to z). Not using symbols
and space.
Password Specify the password for this user here.
Confirm
Password
Specify the password for this user here again.
Click ‘Apply’ to save settings and make the new settings take effect.
To Next Page
Loading...
