66
The descriptions of every setting in this menu will be given below:
Item Description
DHCP Select ‘Enable’ to use DHCP to configure the IP address of
this IP camera via DHCP server automatically; select
‘Disable’ to configure the IP address manually.
Camera Name The name of this IP camera. If you have more than one IP
camera, it’s suggested to use the place’s name where
camera is located, so you can identify the camera easily,
like ‘Garden’ or ‘Front Door’. Spaces are allowed.
IP Address Please specify the IP address you wish to assign to this IP
camera.
Subnet Mask Please specify the subnet mask you wish to assign to this
IP camera.
Gateway Please specify the IP address of the gateway of the your
network.
DNS Server Please specify the IP address of the DNS server of your
network.
Video Port Please specify the port number for video transmission,
default value is ‘4321’.
Web Port Please specify the port number for web management
interface, default value is ’80’.
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort
and discard changes.
To Next Page
Loading...
