72
The descriptions of every setting in this menu will be given below:
Item Description
Send a Test Email After the settings in this page is complete and saved (by
clicking ‘OK’), you can click this button to send a test
E-Mail to verify if these settings are correct and working.
Recipient E-Mail
Address
Input the email recipient’s Email address here.
SMTP Server Input the IP address or host name of the SMTP server (the
server that delivers the Email for you) here.
If you don’t know, please refer to the SMTP server you’re
using in your Email software (like Outlook, Outlook
Express etc.), or ask your network administrator or ISP.
Sender E-Mail
Address
Input the Email address of mail sender, this will help you to
identify the Email sent by this IP camera by sender’s Email
address.
NOTE: Some mail server would reject to deliver the Email
from unknown sender, it’s recommended to input your own
Email address here, or any other actual one.
SMTP Authentication Some SMTP server requires mail senders to be
authenticated before they can send Email. If your SMTP
server requires you to do so, please select ‘Enable’, or
select ‘Disable’ to disable it. If you don’t know, please refer
to the SMTP server you’re using in your Email software
(like Outlook, Outlook Express etc.), or ask your network
administrator or ISP.
User Name Please input the user name of SMTP server here, if your
SMTP server requires the use of authentication.
Password Please input the password of SMTP server here, if your
SMTP server requires the use of authentication.
After all settings are completed, click ‘OK’ to save settings, or click ‘Cancel’ to abort
and discard changes.
To Next Page
Loading...
